54″ RetroFit Return Tread Kit with Riser

54″ x 10.5″ RetroFit Return tread for use in stair remodeling when you remove carpet and add hardwood treads. Comes with a 7.5″ riser that is paintable or stainable.

Remove Carpet and add Hardwood Treads in three easy steps. 1. Remove Carpet – 2. Trim & Glue down Retrofit Tread Kit – 3. Paint & Stain

• Red Oak Tread
• Top Layer is 1/8″ Thick Red Oak
• Trim Attached
• Riser can be Stainable or Paintable
• 54″ Long
• 10.5″ Depth
• Return on both sides. Cut off the side you don’t need (or leave on if you need both sides)