Floor Mount U Channel 120 x 45 mm

Our Floor Mounted U-Channel is used for holding 1/2″ Monolithic Glass. This U-Channel is 121 mm x 43 mm in size and comes in lengths of 2500 mm ( 8 ft. 2 in. ) and 5000 mm ( 16 ft. 4 in. ). It has a Satin Aluminum Polish Finish.

This listing includes the U-Channel Base as well as the , inside and outside 90 degree corners, stainless steel cladding and end caps.

The Wedge Kit ( sold HERE ) is also required in the following quantities:

• 2 kits per 5000 mm piece of U-Channel
• 1 kit per 2500 mm piece of U-Channel
• 1 kit per per 5 corners

Anchors are also required ( wood or concrete ) in the following quantities:

• 10 wood screws or 10 concrete anchors per 2500 mm piece of U-Channel
• 19 wood screws or 19 concrete anchors per 5000 mm piece of U-Channel
• 2 wood screws or 2 concrete anchors per corner

Accessory pieces include the following:

• Stainless Steel Cladding – 123 mm tall x 2500 mm long – Self Adhesive, just peel and stick. Gives a complete stainless steel look and covers the front exposed area.
• Outside 90 Degree Corner – 120 mm x 43 mm x 200 mm – Floor Profile for an Outside 90 Degree Corner.
• Inside 90 Degree Corner – 120 mm x 43 mm x 200 mm – Floor Profile for an Inside 90 Degree Corner.
• End Caps for Level as well as Angle / Rake – One for Flat and One for Angled up to 40 degrees. Installs with a dab of epoxy. Trim to Fit.
• Glass Gasket and Wedge Kit – Comes with enough material to install 2500mm worth of glass. See description above on how to order enough of these kits.